5 vacl mac access-group, 6 vacl mac-ip access-group, Vacl mac access – PLANET XGS3-24042 User Manual
Page 1028: Group, Vacl mac, Ip access
55-4
Command mode:
Global Mode.
Usage Guide:
Use “;” or “-” to input the VLAN or multi-VLANs, but do not exceed 128, and CLI length can not
exceed 80 characters. At present, IPv6 ACL that match flowlabel can not be bound to VLAN Egress
direction.
Example:
Configure the numeric IPv6 ACL for Vlan 5.
Switch(config)#vacl ipv6 access-group 600 in traffic-statistic vlan 5
55.5 vacl mac access-group
Command:
vacl mac access-group {<700-1199> | WORD} {in | out} [traffic-statistic] vlan WORD
no vacl mac access-group {<700-1199> | WORD} {in | out} vlan WORD
Function:
This command configure VACL of MAC type on the specific VLAN.
Parameter:
<700-1199> | WORD: Configure the numeric IP ACL (include: <700-799> MAC standard access list,
<1100-1199> MAC extended access list) or the named ACL.
in | out: Filter the ingress/egress traffic.
traffic-statistic: Enable the statistic of matched packets number.
vlan WORD: The VLAN will be bound to VACL.
Command mode:
Global Mode.
Usage Guide:
Use “;” or “-” to input the VLAN or multi-VLANs, but do not exceed 128, and CLI length can not
exceed 80 characters. None.
Example:
Configure the numeric MAC ACL for Vlan 1-5.
Switch(config)#vacl mac access-group 700 in traffic-statistic vlan 1-5
55.6 vacl mac-ip access-group
Command: