PLANET XGS3-24042 - Manual (Page 683)

37-322
{||}
Function:
Display the routes permitted by BGP and relevant to the route dampening.
Parameter:
: Address-family, such as “ipv4 unicast”.
Command Mode:
Admin and configuration mode
Usage Guide:
Only the surged routes will be displayed. The Parameters shows the display configuration other
than specific routes. The other two options will respectively show the restrained route and the
dampening (recently recovered from invalid) routing messages.
Example:
Switch#sh ip bgp dampening dampened-paths
BGP table version is 12, local router ID is 10.1.1.66
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
*d 100.1.3.0/24 10.1.1.64 00:27:40 100 ?
Total number of prefixes 1
Switch#sh ip bgp dampening flap-statistics
BGP table version is 13, local router ID is 10.1.1.66
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
*d 100.1.3.0/24 10.1.1.64 3 00:06:05 00:27:00 100 ?
Switch#sh ip bgp dampening parameters
dampening 15 750 2000 60 15 (route-map rmp)
Reach ability Half-Life time : 15 min
Reuse penalty : 750
Suppress penalty : 2000
Max suppress time : 60 min