Chapter 42 commands for bgp gr, 1 bgp graceful-restart, 2 bgp graceful-restart restart-time – PLANET XGS3-24042 User Manual
Page 722: Chapter 42 commands for bgp gr -1, Bgp graceful, Restart, Restart restart, Time

Commands for Routing Protocol Chapter 12 Commands for BGP GR
42-1
Chapter 42 Commands for BGP GR
42.1 bgp graceful-restart
Command:
bgp graceful-restart
no bgp graceful-restart
Function:
Enable BGP to support GR and set restart-time and stale-path-time as the default value, no
command disables GR.
Command Mode:
BGP router configuration mode
Default:
Do not enable BGP to support GR.
Example:
Configure GR.
Switch(config-router)# bgp graceful-restart
42.2 bgp graceful-restart restart-time
Command:
bgp graceful-restart restart-time <1-3600>
no bgp graceful-restart restart-time <1-3600>
Function:
Configure BGP GR’s restart-time (Receiving Speaker enables a timeout timer for a neighbor, it uses
the restart-time as the timeout). A restart-time specifies the longest waiting time from Receiving
Speaker finds restarting to the received OPEN messages. If Receiving Speaker does not receive
OPEN messages after exceed the time, it can delete SATLE route saved by neighbor. No command
restores restart-time as the default value of 120 seconds.
Parameter:
<1-3600>:time in seconds.
Command Mode:
BGP route configuration mode
Default:
restart-time uses the default value of 120s.