PLANET XGS3-24042 - Manual (Page 1051)

58-4
Example:
Configure the conflict binding check mode to probe mode.
Switch(config)#savi check binding probe mode
58.1.6 savi enable
Command:
savi enable
no savi enable
Function:
Enable the global SAVI function, the no command disables this global function.
Command Mode:
Global Mode.
Default:
Disable the global SAVI function.
Usage Guide:
Command configuration can be processed for SAVI function after enabling the global SAVI function.
Because SAVI function has already contained security RA function, global SAVI function and
security RA function are mutually exclusive in the global mode.
Example:
Enable SAVI function.
Switch(config)#savi enable
58.1.7 savi ipv6 binding num
Command:
savi ipv6 binding num
no savi ipv6 binding num
Function:
Configure the number of the corresponding binding with the port, no command restores the default
value.
Parameter:
limit-num: set the range from 0 to 65535, the default value of the port binding number is 65535.
Command Mode:
Port Mode.
Default: