PLANET XGS3-24042 - Manual (Page 701)

39-5
ipv6 route tunnel
no ipv6 route tunnel
Function:
Configure the output interface of IPv6 static route as GRE tunnel.
Parameter:
<ipv6-address > is the IPv6 address, is the prefix length, is the GRE tunnel ID.
Command mode:
Global mode.
Usage Guide:
Configure the output interface of IPv6 static route as GRE tunnel.
Example:
Configure the output interface of IPv6 static route as GRE tunnel.
Switch(config)# interface tunnel 1
Switch(config)# ipv6 route 2080::/64 tunnel 1
39.6 loopback-group (Global)
Command:
loopback-group
no loopback-group
Function:
Create loopback-group.
Parameter:
<id> is the loopback-group ID, the ranging from 1 to 128.
Command mode:
Global Mode.
Usage Guide:
Create loopback-group.
Example:
Create loopback-group 1.
Switch(config)#loopback-group 1
39.7 loopback-group (Port)
Command: