PLANET XGS3-24042 - Manual (Page 426)

28-65
MAC means VLAN MAC address.
The compatible remote-id format with HP manufacturer defined as below:
Remote option
2 4 IP
1 byte 1 byte 4 byte
type
Length
IP means the primary IP address of layer 3 interface where DHCP packets from.
Example:
Set remote-id of Relay Agent option82 as the compatible format with HP manufacturer.
Switch(config)#ip dhcp relay information option remote-id format vs-hp
28.6 ip dhcp relay information option self-defined
remote-id
Command:
ip dhcp relay information option self-defined remote-id {hostname | mac | string WORD}
no ip dhcp relay information option self-defined remote-id
Function:
Set creation method for option82, users can define the parameters of remote-id suboption by
themselves.
Parameters:
WORD the defined character string of remote-id by themselves, the maximum length is 64.
Command Mode:
Global Mode
Default:
Using standard method.
User Guide:
After configure this command, if users do not configure remote-id on interface, it will create
remote-id suboption for option82 according to self-defined method. For mac, use the format such as
00-02-d1-2e-3a-0d if it is filled to packets with ascii format, but hex format occupies 6 bytes. Each
option will be filled to packets according to the configured order of the commands and divide them
with delimiter (delimiter is ip dhcp relay information option delimiter configuration).
Example:
Set self-defined method and character string of remote-id suboption are hostname and abc