PLANET XGS3-24042 - Manual (Page 180)

11-26
Usage Guide:
During the specific detection period, errored frame event is induced if the number of errored frame
is larger than or equal to the low threshold and the device notifies the peer by sending event
notification OAMPDU. Note that the low threshold can not be larger than the high threshold.
Example:
Configure the low threshold of errored frame event on Ethernet 1/0/4 to 100.
Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame threshold low 100
11.9 ethernet-oam errored-frame window
Command:
ethernet-oam errored-frame window <seconds>
no ethernet-oam errored-frame window
Function:
Configure the detection period of errored frame event, no command restores the default value.
Parameter:
<seconds>, the detection period value of errored frame event, ranging from 1 to 60 seconds.
Default:
1.
Command Mode:
Port mode
Usage Guide:
Detect the errored frame number of the port after the time of specific detection period. If the number
of errored frame is larger than or equal to the threshold, bring the corresponding event and notify
the peer through OAMPDU.
Example:
Configure the detection period of errored frame event on port1/0/4 to 20s.
Switch(Config-If-Ethernet1/0/4)#ethernet-oam errored-frame window 20
11.10 ethernet-oam errored-frame-period threshold
high
Command:
ethernet-oam errored-frame-period threshold high {<high-frames> | none}