57 show ip ospf interface, Show ip ospf interface – PLANET XGS3-24042 User Manual
Page 586

35-225
22.1.1.0 192.168.1.2 308 0x8000000c 0xc8f0 22.1.1.0/24
ASBR-Summary Link States (Area 0.0.0.2)
Link ID ADV Router Age Seq# CkSum
192.168.1.1 192.168.1.2 1702 0x8000002a 0x89c7
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
2.2.2.0 192.168.1.1 1499 0x80000056 0x3a63 E2 2.2.2.0/24 [0x0]
2.2.3.0 192.168.1.1 1103 0x8000002b 0x0ec3 E2 2.2.3.0/24 [0x0]
35.57 show ip ospf interface
Command:
show ip ospf interface
Function:
Display the OSPF interface messages.
Parameter:
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf interface
Loopback is up, line protocol is up
OSPF not enabled on this interface
Vlan1 is up, line protocol is up
Internet Address 10.10.10.50/24, Area 0.0.0.0
Process ID 0, Router ID 10.10.11.50, Network Type BROADCAST, Cost: 10
Transmit Delay is 5 sec, State Waiting, Priority 1
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 35, Dead 35, Wait 35, Retransmit 5