25 user-control limit ipv4, User, Control limit ipv – PLANET XGS3-24042 User Manual
Page 981

48-17
Status Authorized
Port-control Auto
Supplicant 00-03-0F-FE-2E-D3
Authenticator State Machine
State Authenticated
Backend State Machine
State Idle
Reauthentication State Machine
State Stop
Displayed information
Explanation
Global 802.1x Parameters
Global 802.1x parameter information
reauth-enabled
Whether re-authentication is enabled or not
reauth-period
Re-authentication interval
quiet-period
Silent interval
tx-period
EAP retransmission interval
max-req
EAP packet retransmission interval
authenticator mode
Switch authentication mode
Mac Filter
Enables dot1x address filter or not
MacAccessList
Dot1x address filter table
dot1x-EAPoR
Authentication method used by the switch (EAP relay, EAP
local end)
dot1x-privateclient
Whether the switch supports the privateclient
802.1x is enabled on ethernet
Ethernet1/0/1
Indicates whether dot1x is enabled for the port
Authentication Method:
Port authentication method (MAC-based, port-based,
user-based)
Status
Port authentication status
Port-control
Port authorization status
Supplicant
Authenticator MAC address
Authenticator State Machine
Authenticator state machine status
Backend State Machine
Backend state machine status
Reauthentication State Machine
Re-authentication state machine status
48.25 user-control limit ipv4
Command:
user-control limit ipv4 <count>