13 debug msdp nsm, 14 debug msdp packet, 13 debug msdp nsm -51 – PLANET XGS3-24042 User Manual
Page 776: 14 debug msdp packet -51
44-51
close the switch.
Command Mode:
Admin Mode.
Usage Guide:
The information of receiving/sending keepalive message for MSDP protocol can be monitored after
enables this switch.
Example:
Switch#debug msdp keepalive
44.4.13 debug msdp nsm
Command:
debug msdp nsm
no debug msdp nsm
Function:
Enable/disable the switch of msdp nsm debug.
Default:
Close the switch.
Command Mode:
Admin Mode.
Usage Guide:
The alternation information between running MSDP protocol and NSM module can be monitored
after enable this switch.
Example:
Switch#debug msdp nsm
44.4.14 debug msdp packet
Command:
debug msdp packet {send | receive}
no debug msdp packet {send | receive}
Function:
Enable/disable the debug switch of sending/receiving message for the MSDP protocol.
Default:
Close the switch.
Command Mode: