PLANET XGS3-24042 - Manual (Page 821)

44-96
{} is SN or name of access-list, value range of acl_num is from 1 to 99.
Default:
Default no filter condition
Command Mode:
Interface Configuration Mode
Usage Guide:
Configure interface to filter groups, permit or deny some group joining.
Example:
Configure interface vlan1 to permit group 224.1.1.1, deny group 224.1.1.2.
Switch (config)#access-list 1 permit 224.1.1.1 0.0.0.0
Switch (config)#access-list 1 deny 224.1.1.2 0.0.0.0
Switch (config)#interface vlan 1
Switch(Config-if-Vlan1)#ip igmp access-group 1
44.9.5 ip igmp immediate-leave
Command:
ip igmp immediate-leave group-list {|}
no ip igmp immediate-leave
Function:
Configure IGMP working in immediate-leave mode, that is, when the host transmits member identity
report of equivalent to leave a group, router does not transmit query, it directly confirms there is no
member of this group in subnet; the “no ip igmp immediate-leave” command cancels
immediate-leave mode.
Parameter:
is access-list SN, value is from 1 to 99.
is access-list name.
Default:
Interface default and no immediate-leave group of configuration after finished product
Command Mode:
Interface Configuration Mode
Usage Guide:
The command only can apply in only one host condition in subnet.
Example:
Configure immediate-leave mode on access-group list 1
Switch (Config-if-Vlan1)#ip igmp immediate-leave group-list 1
Switch (Config-if-Vlan1)#