PLANET XGS3-24042 - Manual (Page 284)

15-130
15.8 mls qos cos
Command:
mls qos cos { }
no mls qos cos
Function:
Configures the default CoS value of the port; the “no mls qos cos” command restores the default
setting.
Parameters:
is the default CoS value for the port, the valid range is 0 to 7.
Default:
The default CoS value is 0.
Command mode:
Port Configuration Mode.
Usage Guide:
Configure the default CoS value for switch port. If the ingress packets without 802.1Q tag of the port,
set the cos value of the packets with tag as the default value. If the ingress packets with 802.1Q tag
of the port, do not modify the cos value according to the default cos value.
Example:
Setting the default CoS value of ethernet port 1/0/1 to 7.
Switch(config)#interface ethernet 1/0/1
Switch(Config-If-Ethernet1/0/1)#mls qos cos 7
15.9 mls qos internal-priority
Command:
mls qos internal-priority { }
no mls qos internal-priority
Function:
Configure the default internal priority of the port, the no command restores the default.
Parameters:
the default internal priority of the port, ranging from 0 to 119.
Default:
The default intp value is 0.
Command mode:
Port Mode.