PLANET XGS3-24042 - Manual (Page 923)

45-68
Usage Guide:
Use show command to check the deleted group record.
Example:
Delete all groups.
Switch#clear ipv6 mld snooping vlan 1 groups
Relative Command:
show ipv6 mld snooping vlan <1-4094>
45.8.2 clear ipv6 mld snooping vlan <1-4094>
mrouter-port
Command:
clear ipv6 mld snooping vlan <1-4094> mrouter-port [ethernet IFNAME|IFNAME]
Function:
Delete the mrouter port of the specific VLAN.
Parameters:
<1-4094> the specific VLAN ID; ethernet the Ethernet port name; IFNAME the port name.
Command Mode:
Admin Configuration Mode
Usage Guide:
Use show command to check the deleted group record.
Example:
Delete the mrouter port in vlan 1.
Switch# clear ipv6 mld snooping vlan 1 mrouter-port
Relative Command:
show ipv6 mld snooping mrouter-port
45.8.3 debug mld snooping all/packet/event/timer/mfc
Command:
debug mld snooping all/packet/event/timer/mfc
no debug mld snooping all/packet/event/timer/mfc
Function:
Enable the debugging of the switch MLD Snooping; the “no” form of this command disables the
debugging.