PLANET XGS3-24042 - Manual (Page 1160)

72-16
Parameter:
usage means memory use information.
Command mode:
Admin Mode
Usage Guide:
This command is used for switch debug purposes. The command will interactively prompt the user
to enter start address of the desired information in the memory and output word number. The
displayed information consists of three parts: address, Hex view of the information and character
view.
Example:
Example:
Switch#show memory
start address : 0x2100
number of words[64]:
002100: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002110: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002120: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002130: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002140: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002150: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002160: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
002170: 0000 0000 0000 0000 0000 0000 0000 0000 *................*
72.17 show running-config
Command:
show running-config
Function:
Display the current active configuration parameters for the switch.
Default:
If the active configuration parameters are the same as the default operating parameters, nothing will
be displayed.
Command mode:
Admin Mode
Usage Guide: