PLANET XGS3-24042 - Manual (Page 176)

11-22
Chapter 11 Commands for EFM OAM
11.1 clear ethernet-oam
Command:
clear ethernet-oam [interface {ethernet |} <IFNAME>]
Function:
Clear the statistic information of packets and link event on specific or all ports for OAM.
Parameter:
<IFNAME>, the name of the port needs to clear OAM statistic information
Command Mode:
Admin mode
Example:
Clear the statistic information of OAM packets and link event on all ports.
Switch(config)#clear ethernet-oam
11.2 debug ethernet-oam error
Command:
debug ethernet-oam error [interface {ethernet |} <IFNAME>]
no debug ethernet-oam error [interface {ethernet |} <IFNAME>]
Function:
Enable the debugging of OAM error information, no command disables it.
Parameter:
<IFNAME>: name of the port that the debugging will be enabled or disabled.
Default:
Disable.
Command Mode:
Admin mode
Example:
Enable the debugging of OAM error information for ethernet1/0/1.
Switch#debug ethernet-oam error interface ethernet1/0/1