PLANET XGS3-24042 - Manual (Page 1044)

57-5
+ e + t + h + space, occupy 5 bytes, Slot ID occupies 2 bytes, Port Index occupies 3 bytes, Vlan ID
occupies 4 bytes, delimiter occupies 1 byte.
Example:
Configure access-node-id as xyz, use spv combination mode, delimiter of Slot ID and Port ID as “#”,
delimiter of Port ID and Vlan ID as “/”.
Switch(config)#pppoe intermediate-agent identifier-string xyz option spv delimiter # delimiter /
Switch# show pppoe intermediate-agent identifier-string option delimiter
config identifier string is :xyz
config option is : slot , port and vlan
the first delimiter is : "# "
the second delimiter is : "/ "
After port ethernet1/0/3 of vlan3 receives PPPoE packet, circuit-id value of the added vendor tag
as ”xyz eth 01#003/0003”.
57.7 pppoe intermediate-agent remote-id
Command:
pppoe intermediate-agent remote-id
no pppoe intermediate-agent remote-id
Function:
Configure remote-id of the port, the no command cancels this configuration.
Parameter:
: remote-id, the max character number is 63 bytes.
Command Mode:
Port mode
Default:
This configuration is null.
Usage Guide:
Configure remote-id for each port, if there is no configuration, use switch’s MAC as remote-id value.
Example:
Configure remote-id as abcd on port ethernet1/0/2.
Switch(config-if-ethernet1/0/2)# pppoe intermediate-agent remote-id abcd