PLANET XGS3-24042 - Manual (Page 870)

45-15
Usage Guide:
Enable “pim events debug” switch and display events information about pim operation.
Example:
Switch# debug ipv6 pim events
45.3.3 debug ipv6 pim mfc
Command:
debug ipv6 pim mfc（in|out|）
no debug ipv6 pim mfc（in|out|）
Function:
Enable or Disable pim mfc debug switch.
Default:
Disabled
Command Mode:
Admin Mode.
Usage Guide:
Enable pim mfc debug switch and display generated and transmitted multicast id’s information.
Example:
Switch# debug ipv6 pim mfc in
45.3.4 debug ipv6 pim mib
Command:
debug ipv6 pim mib
no ipv6 debug pim mib
Function:
Enable or Disable PIM MIB debug switch.
Default:
Disabled
Command Mode:
Admin Mode.
Usage Guide:
Inspect PIM MIB information by PIM MIB debug switch. It’s not available now and it’s for the future
extension.
Example: