PLANET XGS3-24042 - Manual (Page 1238)

77-14
77.20 show ip route vrf
Command:
show ip route vrf <vrf-name> [bgp|datebase]
Function:
Display information of the specified route protocol.
Parameters:
<vrf-name>: the VRF name created with the “if vrf” command.
bgp: the route imported via bgp;
database: the IP route table database.
Command Mode:
Admin and Config mode.
Usage Guide:
Display information of the specified route protocol.
Example:
Switch#show ip route vrf vrf-a bgp
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 100:10 (Default for VRF DC1)
*> 11.1.1.0/24 11.1.1.64 0 0 200 ?
*> 20.1.1.0/24 11.1.1.64 0 0 200 ?
77.21 show ip vrf
Command:
show ip vrf [<vrf-name>]
Function:
Implementing this command will display the RIP instance information related with this VPN
route/forwarding instance.
Parameters:
specifies the name of the VPN route/forwarding instance.
Default:
No display by default.
Command Mode:
Admin and Config mode.
Usage Guide:
This command also exists in other route protocols. Implementing this command will also display the