2 commands for dynamic vlan configuration, 1 dynamic-vlan mac-vlan prefer, 2 dynamic-vlan subnet-vlan prefer – PLANET XGS3-24042 User Manual

Page 228: Ommands for, Ynamic, Vlan, Onfiguration, 1 dynamic-vlan mac-vlan prefer -74, 2 dynamic-vlan subnet-vlan prefer -74

12-74

12.2 Commands for Dynamic VLAN Configuration

12.2.1 dynamic-vlan mac-vlan prefer

Command:

dynamic-vlan mac-vlan prefer

Function:

Set the MAC-based VLAN preferred.

Command Mode:

Global Mode.

Default:

MAC-based VLAN is preferred by default.

Usage Guide:

Configure the preference of dynamic-vlan on switch. The default priority sequence is MAC-based

VLAN、IP-subnet-based VLAN、Protocol-based VLAN, namely the preferred order when several

dynamic VLAN is available. After the IP-subnet-based VLAN is set to be preferred and the user wish

to restore to preferring the MAC-based VLAN, please use this command.

Example:

Set the MAC-based VLAN preferred.

Switch#config

Switch(config)#dynamic-vlan mac-vlan prefer

12.2.2 dynamic-vlan subnet-vlan prefer