PLANET XGS3-24042 - Manual (Page 1227)

77-3
clear ip bgp * [vrf <vrf-name>] [in | out | soft [in | out ]]
Function:
Reboot the corresponding bgp process of vrf-name, and the connections between all peers of the
process.
Parameters:
<vrf-name>: the configured VPN instance name, whose length ranges from 1 to 64 characters.
in: soft reboot and configure the inbound update;
out: soft reboot and configure the outbound update;
soft: soft reboot
Default:
No configuration.
Command Mode:
Admin Mode
Usage Guide:
Implementing the “clear ip bgp *” command will restart the BGP process; configuring the “in”
parameter will send route request message to neighbors; configuring the “out” parameter will send
its route to neighbors; configuring the “soft” parameter won’t restart the BGP process.
Example:
Switch#clear ip bgp * vrf VRF-A
Switch#
77.5 debug bgp mpls
Command:
debug bgp mpls
no debug bgp mpls
Function:
Display the information about processing VRF FTN, the global FTN, and global ILM entries while
the bgp vpn is running; the no operation will disable the display.
Default:
No display of debug information.
Command Mode:
Admin Mode.
Usage Guide:
Enable the debug information to check the information about processing VRF FTN, the global FTN,
and global ILM entries while the bgp vpn is running.
Example: