PLANET XGS3-24042 - Manual (Page 1036)

56-7
no mac-authentication-bypass timeout reauth-period
Function:
Set the reauthentication interval at failing authentication state. The no command restores the
default value.
Parameters:
<1-3600>: reauthentication interval, ranging from 1 to 3600s.
Command Mode:
Global Mode
Default:
reauthentication interval is 30s.
Usage Guide:
At failing authentication state, the user processes the reauthentication timely until the authentication
is successful; at the successful state, the user can access the network resources.
Example:
Configure reauthentication time as 20s.
Switch(Config)#mac-authentication-bypass timeout reauth-period 20
56.12 mac-authentication-bypass timeout stale-period
Command:
mac-authentication-bypass timeout stale-period <0-60>
no mac-authentication-bypass timeout stale-period
Function:
Set the time that delete the binding user after MAB port is down. The no command restores the
default value.
Parameters:
<1-60>: The time that delete the binding, ranging from 0 to 60s.
Command Mode:
Global Mode
Default:
30s.
Usage Guide:
If the time that delete the binding as 0, delete all user binding of this port as soon as the MAB port is
down, if the time is bigger than 0, delete the user binding with a delay after the MAB port is down.
Example:
Configure the deletion time as 40s.