PLANET XGS3-24042 - Manual (Page 1066)

59-5
Command Mode:
Admin Mode.
Default:
There is no limitation.
Usage Guide:
Show the parameter and enable information of web portal authentication according to the condition.
Example:
Show the parameter and enable information of web portal authentication.
switch#show webportal interface ethernet 1/0/1
webportal enable
webportal binding-limit 128
59.8 show webportal binding
Command:
show webportal binding {interface |}
Function:
Show the binding information of web portal authentication.
Parameter:
: The port name, the name or ID of the port may be null.
Command Mode:
Admin Mode.
Default:
There is no limitation.
Usage Guide:
Collect the binding information according to the specified condition, such as the binding number, IP,
MAC, interface, VLAN ID and state, etc.
Example:
Show the binding information of web portal authentication.
switch#show webportal binding ?
interface Interface setting
| Output modifiers
switch#show webportal binding interface ethernet 1/0/1
Interface Ethernet1/0/1 user config:
webportal enable: Enable