PLANET XGS3-24042 User Manual
Page 939

47-5
access-list
any-destination | {host-destination
access-list <num> {deny | permit} {eigrp | gre | igrp | ipinip | ip | ospf |
{{ <sIpAddr>
any-destination | {host-destination
<tos> ][time-range <time-range-name> ]
no access-list
Functions:
Create a numeric extended IP access rule to match specific IP protocol or all IP protocol; if
access-list of this coded numeric extended does not exist, thus to create such a access-list.
Parameters:
mask of source IP, the format is dotted decimal notation;
the format is dotted decimal notation; <dMask> is the reverse mask of destination IP, the format is
dotted decimal notation, attentive position o, ignored position1;<igmp-type>,the type of igmp, 0-15;
0-7;
source port;
destination port;
0-65535;
Command Mode:
Global mode
Default:
No access-lists configured.
Usage Guide:
When the user assign specific
the lists are added into this ACL; the access list which marked 200-299 can configure not continual
reverse mask of IP address.
<igmp-type> represent the type of IGMP packet, and usual values please refer to the following
description:
17(0x11): IGMP QUERY packet
18(0x12): IGMP V1 REPORT packet
22(0x16): IGMP V2 REPORT packet
23(0x17): IGMP V2 LEAVE packet
34(0x22): IGMP V3 REPORT packet