PLANET XGS3-24042 - Manual (Page 1053)

58-6
ethernet1/0/1 type slaac lifetime 2010
Configure the static binding for SAVI manually.
Switch(config)#savi ipv6 check source binding ip 2001::20 mac 00-25-64-BB-8F-04
Interface ethernet1/0/1 type static
58.1.9 savi ipv6 check source ip-address mac-address
Command:
savi ipv6 check source [ip-address mac-address | ip-address | mac-address]
no savi ipv6 check source
Function:
Enable the control authentication function for the packets of the port, no command disables this
function.
Command Mode:
Port Mode.
Default:
Disable the control filtering function of the port.
Usage Guide:
The global SAVI function must be enabled before configuring this command.
Example:
Enable the control filtering function of the packets on port ethernet1/0/1.
Switch(config)#interface ethernet1/0/1
Switch(config-if-ethernet1/0/1)# savi ipv6 check source ip-address mac-address
58.1.10 savi ipv6 {dhcp-only | slaac-only | dhcp-slaac}
enable
Command:
savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
no savi ipv6 {dhcp-only | slaac-only | dhcp-slaac} enable
Function:
Enable SAVI application scene function, no command disables the function.
Parameter:
dhcp-only: dhcp-only application scene