PLANET XGS3-24042 - Manual (Page 1069)

59-8
59.12 webportal nas-ip
Command:
webportal nas-ip
no webportal nas-ip
Function:
Configure IP source address for communicating between accessing device and portal server.
Parameter:
: IP source address for communicating between accessing device and portal server in
dotted decimal notation, it must be the legal unicast address.
Command Mode:
Global Mode.
Default:
Do not configure the specific IP source address, the communication between accessing device and
portal server uses the IP address of the sending interface.
Usage Guide:
The configured source address must be the local IP address, or else it maybe not process the
packet communication with portal server. It is recommended to use the loopback interface address
as the source address to avoid the return packet is unreachable when the physical interface is down,
and nas-ip should be configured in web portal. The no command deletes IP source address for
communicating between accessing device and portal server.
Example:
Configure IP source address as 10.1.1.1 for communicating between accessing device and portal
server.
switch(config)#webportal nas-ip 10.1.1.1
59.13 webportal redirect
Command:
webportal redirect
no webportal redirect
Function:
Configure HTTP redirection address of web portal authentication.
Parameter:
is IP address of portal server.
Command Mode: