PLANET XGS3-24042 - Manual (Page 165)

8-11
Do not display the configuration information of LLDP on the port.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the configuration information of LLDP on the port by using “show lldp interface
ethernet XXX”.
Example:
Check the configuration information of LLDP on the port after LLDP is enabled on the switch.
Switch(config)#show lldp interface ethernet 1/0/1
Port name: ethernet 1/0/1
LLDP Agent Adminstatus: Both
LLDP Operation TLV: portDecs sysName sysDesc sysCap
LLDP Trap Status: disable
LLDP maxRemote: 100
LLDP Overflow handle: discard
LLDP interface remote status : Full
8.18 show lldp neighbors interface ethernet
Command:
show lldp neighbors interface ethernet < IFNAME >
Function:
Display the LLDP neighbor information of the port.
Default:
Do not display the LLDP neighbor information of the port.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the LLDP neighbor information of the port by using “show lldp neighbors interface
ethernet XXX”.
Example:
Check the LLDP neighbor information of the port after LLDP is enabled on the port.
Switch(config)#show lldp neighbors interface ethernet 1/0/1