PLANET XGS3-24042 - Manual (Page 865)

45-10
Example:
Configure transmission interval of state-refresh message on interface vlan1 to 90s.
Example:
Switch (Config-if-Vlan1)#ipv6 pim state-refresh origination-interval 90
45.2.14 show ipv6 pim interface
Command:
show ipv6 pim interface [detail]
Function:
Display PIM interface information.
Command Mode:
Any Mode
Example:
Switch#show ipv6 pim interface
Interface VIFindex Ver/ Nbr DR
Mode Count Prior
Vlan2 0 v2/S 0 1
Address : fe80::203:fff:fee3:1244
Global Address: 2000:1:111::100
DR : this system
Vlan3 2 v2/S 0 1
Address : fe80::203:fff:fee3:1244
Global Address: 2000:10:1:13::1
DR : this system
Displayed Information Explanations
Address Interface address
Interface Interface name
VIF index Interface index
Ver/Mode Pim version and mode,usually v2,sparse mode
displays S,dense mode displays D
Nbr Count The interface’s neighbor count
DR Prior Dr priority
DR The interface’s DR address