PLANET XGS3-24042 - Manual (Page 1009)

52-7
52.11 radius-server accounting host
Command:
radius-server accounting host {<ipv4-address> | <ipv6-address>} [port >] [key
<string>] [primary]
no radius-server accounting host {<ipv4-address> | <ipv6-address>}
Function:
Specifies the IPv4/IPv6 address and the port number, whether be primary server for RADIUS
accounting server; the no command deletes the RADIUS accounting server.
Parameters:
| > stands for the server IPv4/IPv6 address;
for server listening port number from 0 to 65535;
<string> is the key string;
primary for primary server. Multiple RADIUS sever can be configured and would be available.
RADIUS server will be searched by the configured order if primary is not configured, otherwise, the
specified RADIUS server will be used first.
Command Mode:
Global Mode
Default:
No RADIUS accounting server is configured by default.
Usage Guide:
This command is used to specify the IPv4/IPv6 address and port number of the specified RADIUS
server for switch accounting, multiple command instances can be configured. The <port-number>
parameter is used to specify accounting port number, which must be the same as the specified
accounting port in the RADIUS server; the default port number is 1813. If this port number is set to 0,
accounting port number will be generated at random and can result in invalid configuration. This
command can be used repeatedly to configure multiple RADIUS servers communicating with the
switch, the switch will send accounting packets to all the configured accounting servers, and all the
accounting servers can be backup servers for each other. If primary is specified, then the specified
RADIUS server will be the primary server. It only configures a RADIUS primary server whether the
server use IPv4 address or IPv6 address.
Example:
Sets the RADIUS accounting server of IPv6 address to 2004:1:2:3::2, as the primary server, with
the accounting port number as 3000.
Switch(config)#radius-server accounting host 2004:1:2:3::2 port 3000 primary