39 timers spf, Timers spf – PLANET XGS3-24042 User Manual
Page 620
36-259
IPv6 Routing Table
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - IS-IS, B - BGP
> - selected route, * - FIB route, p - stale info
Timers: Uptime
C*> ::1/128 via ::, Loopback, 00:29:53
O 2001::/64 [110/10] via ::, Vlan1, 00:01:07 ,process aaa
C*> 2001::/64 via ::, Vlan1, 00:02:54
O*> 2006::/64 [110/10] via ::, Vlan1, 00:01:07, process aaa
O*> 2008::/64 [110/20] via fe80::203:fff:fe01:2542, Vlan1, 00:00:54, process bbb
36.39 timers spf
Command:
timers spf <spf-delay>
no timers spf
Function:
Adjust route calculation timer value. The “no timers spf” restores the relevant value to default.
Parameter:
Command Mode:
OSPFv3 protocol mode
Usage Guide:
In this command the delay time between receiving topology change and SPF calculation, and
further configured the hold time between two discontinuous SPF calculations.
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#timers spf 5 10