PLANET XGS3-24042 - Manual (Page 609)

36-248
Parameter:
is the specific name of interface.
Default:
Not configured
Command Mode:
OSPFv3 protocol mode
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf
Switch(config-router)#passive-interface vlan1
36.26 redistribute
Command:
[no] redistribute {kernel |connected| static| rip| isis| bgp} [metric<value>] [metric-type
{1|2}][route-map]
Function:
Introduce route learnt from other routing protocols into OSPFv3.
Parameter:
kernel Introduct from kernel route
connected Introduce from direct route
static Introduce from static route
rip Introduce from the RIP route
isis Introduce from ISIS route
bgp Introduce from BGP route
metric <value> is the introduced metric value, ranging between 0-16777214
metric-type {1|2} is the metric value type of the introduced external route, which can be 1 or 2, and
it is 2 by default
route-map targets to the probe of the route map for introducing route
Command Mode:
OSPFv3 protocol mode
Usage Guide:
Learn and introduce other routing protocol into OSPFv3 area to generate AS-external_LSAs.
Example:
Switch#config terminal
Switch(config)#router ipv6 ospf