4 commands for urpf, 1 show urpf, 2 urpf enable – PLANET XGS3-24042 User Manual
Page 355: 5 commands for arp configuration, 1 arp, Ommands for, Urpf -201, 1 show urpf -201, 2 urpf enable -201, Onfiguration
19-201
Switch(config)# no ip fib optimize
19.4 Commands for URPF
19.4.1 show urpf
Command:
show urpf
Function:
Display which interfaces have been enabled with URPF function.
Command Mode:
Admin and Configuration Mode
Example:
Switch#show urpf
19.4.2 urpf enable
Command:
urpf enable
no urpf enable
Function:
Enable the global URPF function.
Command mode:
Global Mode
Default:
The URPF protocol module is disabled by default.
Example:
Switch(config)#urpf enable
19.5 Commands for ARP Configuration
19.5.1 arp
This manual is related to the following products: