PLANET XGS3-24042 - Manual (Page 198)

11-44
<IFNAME>, the port that the statistic information of OAM link events needs to be shown, the statistic
information of OAM link events for all ports will be shown if this parameter is not specified.
Command Mode:
Admin mode
Example:
Show configuration of link events on ethernet 1/0/1.
Switch#show ethernet-oam link-events configuration interface ethernet 1/0/1
Ethernet 1/0/1 link-monitor configuration：
event high-threshold low-threshold window(s)
----------------------------------------------------------------------------------------------------
Err-symbol-Period none 1 2
Err-frame-Period none 1 10
Err-frame none 2 5
Err-frame-second-summary none 2 600
----------------------------------------------------------------------------------------------------
Field Description
Event Event type
Err-symbol-Period Errored symbol event
Err-frame-Period Errored frame period event
Err-frame Errored frame event
Err-frame-second-summary Errored frame seconds event
high-threshold High threshold
low-threshold Low threshold
window(s) Detection period in seconds.
11.29 show ethernet-oam loopback status
Command:
show ethernet-oam loopback status [interface {ethernet |} <IFNAME>]
Function:
Show OAM loopback status of specified or all ports.
Parameter:
<IFNAME>, the port that OAM loopback status needs to be shown, OAM loopback status for all
ports will be shown if this parameter is not specified.