PLANET XGS3-24042 - Manual (Page 240)

13-86
Chapter 13 Commands for MAC
Address Table Configuration
13.1 Commands for MAC Address Table Configuration
13.1.1 clear mac-address-table dynamic
Command:
clear mac-address-table dynamic [address ] [vlan ] [interface [ethernet |
portchannel] ]
Function:
Clear the dynamic address table.
Parameter:
: MAC address will be deleted;
the port name for forwarding the MAC packets;
VLAN ID.
Command Mode:
Admin mode.
Usage Guide:
Delete all dynamic address entries which exist in MAC address table, except application, system
entries. MAC address entries can be classified according to different sources, the types are as
follows: DYNAMIC, STATIC, APPLICATION, SYSTEM. DYNAMIC is the dynamic MAC address
entries learned by switch, it can be aged by switch automatically.
Example:
Delete all dynamic MAC.
Switch#clear mac-address-table dynamic
13.1.2 mac-address-table aging-time
Command:
mac-address-table aging-time <0 | aging-time>
no mac-address-table aging-time
Function:
Sets the aging-time for the dynamic entries of MAC address table.