PLANET XGS3-24042 - Manual (Page 779)

44-54
Command:
description <text>
no description
Function:
Add description information of specified MSDP Peer.
Parameter:
text: Description text, range between 1 to 80 bytes.
Command Mode:
MSDP Peer Configuration Mode.
Default:
There is no specified by default.
Usage Guide:
To add description for the specified MSDP Peer in order to identify the different MSDP configuration.
The no form of this command will remove the description.
Example:
Switch(config)#router msdp
Switch(router-msdp)#peer 20.1.1.1
Switch(router-msdp-peer)# description PLANET-20
44.4.19 exit-peer-mode
Command:
exit-peer-mode
Function:
Quit MSDP Peer configuration mode, and enter MSDP configuration mode.
Command Mode:
MSDP Peer Configuration Mode.
Usage Guide:
MSDP configuration mode can be returned to with the exit-peer-mode command, when
configuration to an MSDP Peer is done.
Example:
Back to MSDP configuration mode from MSDP Peer configuration mode.
Switch(config-msdp-peer)# exit-peer-mode
44.4.20 mesh-group