PLANET XGS3-24042 - Manual (Page 847)

44-122
The command is used for enable the IGMP Proxy timer debugging switch which appointed.
Example:
Switch# debug ip igmp proxy timer
44.11.7 ip igmp proxy
Command:
ip igmp proxy
no ip igmp proxy
Function:
Enable the IGMP Proxy function; the “no ip igmp proxy” command disables this function.
Command Mode:
Global Mode.
Default:
The switch disables IGMP Proxy by default.
Usage Guide:
Use this command to enable IGMP Proxy, and configure one upstream port and at least one
downstream port under interface configuration mode if make the IGMP Proxy operate.
Example:
Enable IGMP Proxy under Global Mode.
Switch (config)#ip igmp proxy
44.11.8 ip igmp proxy aggregate
Command:
ip igmp proxy aggregate
no ip igmp proxy aggregate
Function:
To configure non-query downstream ports to be able to aggregate the IGMP operations.
Command Mode:
Global Mode.
Default:
The non-query downstream ports are not to be able to aggregate the IGMP operations in default.
Usage Guide:
By default non-query downstream ports cannot aggregate and redistribute the multicast messages.
This command is used to enable all the downstream ports to be able to aggregate and redistribute