PLANET XGS3-24042 - Manual (Page 723)

Commands for Routing Protocol Chapter 12 Commands for BGP GR
42-2
Example:
Configure restart-time as 60s for BGP GR
Switch(config-router)# bgp graceful-restart restart-time 60
42.3 bgp graceful-restart stale-path-time
Command:
bgp graceful-restart stale-path-time <1-3600>
no bgp graceful-restart stale-path-time <1-3600>
Function:
Configure stale-path-time for BGP GR. Specify the longest waiting time that delete stale route from
the received OPEN messages to the received EOR for Receiving Speaker. No command restores
stale-path-time as the default value of 360 seconds.
Parameter:
<1-3600>：time in seconds
Command Mode:
BGP route configuration mode
Default:
stale-path-time uses the default value of 360s.
Example:
Configure stale-path-time as 460s for BGP GR.
Switch(config-router)# bgp graceful-restart stale-path-time 460
42.4 bgp selection-deferral-time
Command:
bgp selection-deferral-time <1-3600>
no bgp selection-deferral-time <1-3600>
Function:
Configure selection-deferral-time for BGP GR. Specify the longest waiting time that start to count
selection route from the received OPEN messages to the received EOR for Restarting Speaker. If
Restarting Speaker does not receive EOR after exceed the time, it can count selection route. No
command restores selection-deferral-time as the default value of 120 seconds.
Parameter:
<1-3600>：time in seconds