PLANET XGS3-24042 - Manual (Page 438)

29-77
Global configuration mode
Usage Guide:
The command has no effect on ports with self-defined subscriber-id. If user redefines the
subscriber-id of the port after using the command, the user-defined one prevails. This configuration
is null by default.
Example:
Switch(config)# ipv6 dhcp relay subscriber-id select sp delimiter #
29.1.9 ipv6 dhcp server remote-id option
Command:
ipv6 dhcp server remote-id option
no ipv6 dhcp server remote-id option
Function:
This command enables DHCPv6 server to support the identification of option 37, the no form of this
command disables it.
Default:
Do not support option 37.
Command Mode:
Global configuration mode
Usage Guide:
Configure this command if option 37 options is expected to be identified and processed by DHCPv6
server, otherwise they will be ignored. Option 37 is not supported by default.
Example:
Enable the DHCPv6 server to support option 37.
Switch(Config)# ipv6 dhcp server remote-id option
29.1.10 ipv6 dhcp server select relay-forw
Command:
ipv6 dhcp server select relay-forw
no ipv6 dhcp server select relay-forw
Function:
This command enables the DHCPv6 server to support selections when multiple option 37 or option
38 options exist and the option 37 and option 38 of relay-forw in the innermost layer are selected.
The no operation of it restores the default configuration, i.e. selecting option 37 and option 38 of the
original packets.