PLANET XGS3-24042 - Manual (Page 866)

45-11
45.2.15 show ipv6 pim mroute dense-mode
Command:
show ipv6 pim mroute dense-mode [group <X:X::X:X>] [source <X:X::X:X>]
Function:
Display PIM-DM message forwarding items.
Parameter:
group : displays forwarding items relevant to this multicast address
Source < X:X::X:X >: displays forwarding items relevant to this source.
Default:
Do not display
Command Mode:
Admin Mode
Usage Guide:
The command shows PIM-DM multicast forwarding items, namely forwarding items of forward
multicast packet in system FIB table.
Example:
Display all of PIM-DM message forwarding items.
Switch(config)#show ipv6 pim mroute dense-mode
IP Multicast Routing Table
(*,G) Entries: 1
(S,G) Entries: 1
(*, ff1e::15)
Local ..l.............................
(2000:10:1:12::11, ff1e::15)
RPF nbr: ::
RPF idx: Vlan12
Upstream State: FORWARDING
Origin State: ORIGINATOR
Local ................................
Pruned ................................
Asserted ................................
Outgoing ..o.............................
Switch#