PLANET XGS3-24042 - Manual (Page 451)

30-90
30.3 debug ip dhcp snooping packet
Command:
debug ip dhcp snooping packet
no debug ip dhcp snooping packet
Function:
This command is used to enable the DHCP SNOOPING debug switch to debug the
message-processing procedure of DHCP SNOOPING.
Command Mode:
Admin Mode.
Usage Guide:
The debug information that the DHCP SNOOPING is processing messages, including every step in
the message-processing procedure: adding alarm information, adding binding information,
transmitting DHCP messages, adding/peeling option 82 and etc.
30.4 debug ip dhcp snooping packet interface
Command:
debug ip dhcp snooping packet interface {[ethernet] }
no debug ip dhcp snooping packet {[ethernet] }
Function:
This command is used to enable the DHCP SNOOPING debug switch to debug the information that
DHCP SNOOPING is receiving a packet.
Parameters:
: Interface name.
Command Mode:
Admin Mode.
Usage Guide:
The information that DHCP Snooping is receiving messages from a specific port.
30.5 debug ip dhcp snooping update
Command:
debug ip dhcp snooping update
no debug ip dhcp snooping update