PLANET XGS3-24042 - Manual (Page 693)

37-332
37.106 show ip bgp vrf
Command:
show ip bgp vrf [NAME] {summary | A.B.C.D | A.B.C.D/M}
Function:
For displaying the routing messages and the neighbors permitted by BGP.
Parameter:
: The name of the VRF instance
summary: Display the summary information of the BGP neighbor
A.B.C.D: IP address
A.B.C.D/M: IP address and the mask
Command Mode:
Admin and configuration mode
Usage Guide:
Display BGP routing messages by different parameters (such as IPv4 address or IPv4
address/mask), or a route covered by a prefix, or only the routing information don’t match the
earliest IP address (namely the route is not A or B or C type address.)
Example:
1) Display the bgp neighbor information:
S2#show ip bgp vrf 1 summary
BGP router identifier 30.1.1.2, local AS number 200
BGP table version is 8
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
30.1.1.1 4 100 57 51 8 0 0 00:41:44 31
Total number of neighbors 1
The explanation of the displayed contents:
Displayed Content Explanation
identifier The local identifier
local AS
table version
AS-PATH entries
community entries
Neighbor Neighbor address