Echelon LonMaker - Manual (Page 75)

LonMaker User’s Guide 59
location each time you open the drawing. Click Next. The Network Interface page appears,
unless the Skip this Prompt check box was previously selected.
8. Select the
Network Attached check box if the LonMaker computer is attached to the physical
network and you want the LonMaker tool to communicate with the physical devices. If you select
this check box and you have more than one network interface in your computer, select the name of
the LNS network interface in the Network Interface Name list. Click Next. The User Logon
page appears, unless user profiles have not been defined for the network and the Skip this Prompt
check box was previously selected.