Echelon LonMaker User Manual
Page 101
LonMaker User’s Guide
85
2. Enter the following information:
Source Functional
Block
Name
Displays the name of the source functional block (a master shape
or an existing functional block) from which the new functional
block was created.
This box will be empty if the functional block was created by
dragging the generic functional block master shape to the
LonMaker drawing.
Type
Displays the functional profile represented by the source functional
block (open loop sensor object, for example).
This box will be empty if the functional block was created by
dragging the generic functional block master shape to the
LonMaker drawing.
Subsystem
Name
Specify the subsystem containing the functional block’s device.
The default is the subsystem containing the functional block.
Browse
Click to browse the subsystem hierarchy and assign the functional
block to a device in a different subsystem.
Device
Name
Select a device from a list of all the devices in the selected
subsystem that supports the functional block you are creating. If
you are creating a generic functional block shape, all devices in the