Echelon LonMaker - Manual (Page 37)

LonMaker User’s Guide 21
commission or recover L ON W ORKS devices. See the LonMaker Software License Agreement in
Appendix E for additional restrictions. To begin your installation, follow these steps:
1. If you previously installed a LonMaker Trial Edition and you are now installing one of the full
editions, you must first uninstall the Visio Trial software. If you do not uninstall the Visio Trial
software first, the LonMaker software will be installed, but the full version of Visio will not.
If you already have a licensed copy of the LonMaker Integration Tool, you cannot install the
LonMaker Trial Edition.
2. Close all running Windows applications.
3. Disable any L ON W ORKS services.
4. Insert the LonMaker CD into your CD-ROM drive.
5. If the LonMaker setup application does not launch immediately, click Start on the taskbar and
then and click Run. Browse to the LMWSetup application on the LonMaker CD and click Open.
The Select Components dialog box opens.
6. Select the components that you wish to install by selecting the appropriate check boxes on the
Select Components dialog box.
Visio: Installs the Visio 2003 drawing tool. If you have an existing installation of Visio, you still
must install Visio from the LonMaker CD if you do not have Visio 2003.
LonMaker Integration Tool: Installs the required components of the LonMaker tool. Installing
the LonMaker tool automatically installs the LNS Turbo Edition network operating system, and
the drivers for the following network interfaces: the
i .LON 10 Ethernet Adapter, i .LON 100
Internet Server, and i .Lon 600 L ON W ORKS /IP Server; U10/U20 USB network interfaces; and
PCC-10 and PCLTA-10, 20, and 21 PCI network interfaces. One of these interfaces or another
network interface that is compatible with LNS is required for using the LonMaker tool on a
L
ON W ORKS channel.
If you are using the LonMaker tool on an IP-852 channel, you will need an IP network interface
(such as Ethernet) card or modem with PPP software. An IP network interface is also required if
you are using an
i .LON 10 or i .LON 100 Internet Server as an IP-852 interface.
If you are using another LNS or IP network interface, install the network interface hardware and
driver following the instructions provided with the hardware.