Echelon LonMaker - Manual (Page 361)

LonMaker Turbo Editions User’s Guide 345
the NSD. In most cases, you should perform the upgrade.
However, if you are only temporarily using a different network
interface, you may choose not to upgrade. In this case,
communication with physical devices is limited until you reopen
the network with the original network interface. If initially you
choose not to upgrade the NSD and decide later to upgrade, right-
click the NSD shape, and then click Upgrade NSD on the shortcut
menu.
When moving from an LNS fast (layer 2) network interface to a
legacy LNS (layer 5) network interface, all connections and
monitor sets may not be created on the new network interface. If
this happens, a dialog displays the items that will be lost and gives
you an opportunity to cancel the upgrade.
Scope: Current network, current LonMaker computer
Enable Warning When
LonMaker Language
Setting does not
Match Visio Displays a message when the language set in the LonMaker tool
and the currently installed language in Visio do not match.
Scope: All networks, current LonMaker computer
Enable Warning When
LonMaker Language
Setting does not
Match Network Displays a message when the languages set in the LonMaker tool
and the LonMaker drawing do not match.
This can occur if the installed languages are different between the
LonMaker tool that created the LonMaker drawing and the one
opening it.
Scope: Current network, current LonMaker computer
Enable Visio Version
Warning Displays a message if the version of Visio installed on your
computer is incompatible with your version of the LonMaker tool.
This applies only to versions of Visio newer than Visio 2003. If
an older version of Visio is installed on your computer and you do
not also have Visio 2003 installed, the LonMaker tool will not run
on your computer.
Scope: All networks, current LonMaker computer
Enable Warning
About Pending Credits
Request When Devices
are Decommissioned Displays a message when you have ordered LonMaker credits, and
you are trying to decommission one or more devices prior to
receiving a new application key.
Decommissioning devices before receiving your application key
will invalidate your activation code (also called the PC key). If
you proceed with decommissioning a device, you will need to
submit a new request for an activation key (also called the
application key).
Scope: All networks, current LonMaker computer
Enable Warning
About Pending Credits
Request When Devices
are Deleted Displays a message when you have ordered LonMaker credits, and
you are trying to delete one or more devices prior to receiving a
new application key.
Deleting devices before receiving your activation key will
invalidate your activation code (PC key). If you proceed with
deleting a device, you will need to submit a new request for an
activation key (application key).
Scope: All networks, current LonMaker computer