Echelon LonMaker - Manual (Page 346)

330 Appendix A - Setting LonMaker Default Options
General Options
The General category contains the following options.
Confirm Deletes Prompts you to confirm the deleting of a LonMaker shape. This
option is selected by default.
Scope: Current network, current LonMaker computer
Force Wizard
Prompts Displays all wizards when you create a new LonMaker shape,
regardless of the settings of any other options. This option is cleared
by default.
If this check box is selected, and you create a functional block with
automatic device selection enabled, for example, the Functional
Block Wizard will still open.
If this check box is cleared and a functional block and its associated
device are copied, for example, the new functional block will
automatically be associated with the new device and the Functional
Block Wizard will not open.
Scope: Current network, current LonMaker computer
Enable Tracing Enables LonMaker tracing. You should only enable this option
when requested to do so by Echelon support personnel. This option
is cleared by default.
The LonMaker tracing output is saved in a file called trace.log,
which is stored in the LM\Drawings\<network> folder.
Scope: Current network, current LonMaker computer
Enable Monitoring Enables connection monitoring, LonMaker text box monitoring, and
LNS text box monitoring. Clear this check box to disable all NV
polling by the LonMaker tool. This check box does not affect the