Echelon LonMaker - Manual (Page 220)

204 Maintaining Networks
4. Select the Preserve Neuron ID check box to recommission the same device or router later
without re-entering the configuration data.
5. Click OK. The color of the device shape changes to crosshatched yellow, indicating that the
device is unconfigured.
Resynchronizing Configuration Properties
You can resynchronize the configuration property values in the LNS network database with those in
the physical devices. You may need to do this if the values get out of synchronization when a network
tool not based on LNS is used to update the physical devices, or if the devices themselves update their
own configuration properties.
To resynchronize the configuration properties for a device, follow these steps:
1. Right-click the device, or select multiple devices and right-click one of them, point to
Commissioning, and then click Resync CPs on the shortcut menu. The Set Configuration
Properties dialog appears.
2. Select a synchronization operation and which types of configuration properties to synchronize.