Echelon LonMaker - Manual (Page 375)

LonMaker User’s Guide 359
c. In the Device Offset box, enter 32 if the temperature is displayed in Fahrenheit (degrees F),
or enter 0 if the temperature is displayed in Celsius (degrees C). The temperature displayed
depends on the Regional Settings in Windows.
d. Click the Translation tab. A translation table appears. The translation table maps a set of
input values for a thermistor to a set of temperature output values. The temperature values are
then sent to the Analog output network variable on the Thermostat (AI) functional block. The
values that lie between defined input/output pairs are determined by the LonPoint software,
which automatically interpolates the values linearly.
e. Enter the following values into the translation table and then click OK. Fahrenheit values are
shown first and then the Celsius values.