Echelon LonMaker - Manual (Page 343)

LonMaker User’s Guide 327
Routers Specifies the initial state of a new router after it has been
commissioned. You have two choices:
• Online. The router will forward packets between the channels
connected to it. Use this setting to ensure routers are
operational as they are commissioned. This is the default.
• Offline. The router will not forward packets between the
channels connected to it.
Scope: Current network, all LonMaker computers
Commission After
Creation Selects the check box to commission new devices and routers on the
first page of their respective wizards. This option is cleared by
default.
Scope: Current network, current LonMaker computer
Enable App Device
Authentication Enables authentication for new devices. Authentication must be
enabled for the network for it to be used by a device. This option is
cleared by default.
Scope: Current network, all LonMaker computers
Enable Router
Authentication Enables authentication for new routers. Authentication must be
enabled for the network for it to be used by a router. This option is
cleared by default.
Scope: Current network, all LonMaker computers
Functional Block Options
The Functional Block category contains the following options.