Echelon LonMaker - Manual (Page 153)

LonMaker User’s Guide 137
2. Set the following options:
Original Channel
Name Specifies the current channel on which the devices or routers are
attached.
If you are moving devices or routers from a subsystem shape that has
devices or router shapes connected on two or more channels, select
the channel with the devices or routers you want to move. Only
those devices or routers located on the selected channel will be
moved.
Select the Exclude Nested Subsystems from Subsystem
Operations check box in the Subsystem Properties to limit the
scope of the move to the current subsystem. To select or clear this
check box, right-click a Subsystem shape and select Properties from
the shortcut menu, or right-click an empty space in the drawing page
and select Subsystem Properties from the shortcut menu.
Destination
Channel Specifies the new channel.
• Select Auto Detect to have the LonMaker tool automatically
discover the new channel. The LonMaker computer must be
attached to the network to use this option. You cannot move
routers using this option.
• Select Specify to manually select the channel from the Name
list.
Destination Subnet Specifies the new subnet (routers cannot have their subnet changed).
• Select Auto-Select to have the LonMaker tool choose an
appropriate subnet.
• Select Create New Subnet to create a new subnet and place the