Echelon LonMaker - Manual (Page 190)

174 Monitoring and Controlling Networks
see that this configuration property has day, hour, minute, second, and milliseconds fields and view
the minimum and maximum values for each of these fields.
To open the Set Network Variable/Set Configuration Property dialog, right-click the object and
click Details on the shortcut menu.
All the fields for the selected object are listed in structural order in the Field List box. To set the value
for a field, expand that field and then click twice slowly on the value that appears below it. Enter a
valid value for the field (the minimum and maximum values appear in the Field Info box to the right).
Click OK to apply the changes.
If a network variable or configuration property has an enumerated type such as SNVT_hvac_mode
and SCPT_hvac_type, a list of all the possible enumerations for the selected object appears the bottom
of the dialog. Select the desired enumeration from the list and then click OK. Alternatively, you can
click twice slowly on the value that appears below the object in the Field List box and enter a valid
enumeration for the object.